Hello,
Here is small update about my slow activity :)
I built and tested v0.6 of my Y720R.
Specification:
I used ESC mounts described here.
And there is no ugly green square plates, all surfaces are machined from CF:
Tarot 16mm tubes were replaced by custom cut thicker ones with 1.5mm wall:
It's still not perfect but looks nicer especially in Nevada desert landscape :)
Here is small update about my slow activity :)
I built and tested v0.6 of my Y720R.
Specification:
- Frame type - Y6
- Size - ~720mm diameter
- Motors - Multistar 3508 380kV (diff from v0.5)
- Propellers - 15x55/14x55/13x55
- ESC - 30A AfroESC Opto
- Flight controller - 3DR Pixhawk
- Battery - 6S (diff from v0.5)
- Weight: 1800g without battery
- Flight time ~13min (5200mAh and 14x55 props)
I used ESC mounts described here.
And there is no ugly green square plates, all surfaces are machined from CF:
Tarot 16mm tubes were replaced by custom cut thicker ones with 1.5mm wall:
It's still not perfect but looks nicer especially in Nevada desert landscape :)
